Nationwide: 1 800 741 9956

Swimming Pool Chillers

Another application for a swimming pool heat pump will be to cool the water temperature on very hot days. As we experienced unusually warm weather last summer, many pool owners have found that their pools were not refreshing anymore. The solution is simple.  If you get a heat pump with a "Heat & Cool" or "Chiller" option. You will be able to cool the pool if the weather gets too hot and as a bonus keep the pool warm in the spring and fall to get the most use out of your swimming season.
Heat & Cool units have a reverse cycle. You set the thermostat on the cool mode and the machine will start cooling your pool immediately.
Another advantage of Heat & Cool pool heaters is that in the heating mode they will heat at colder outside air temperatures than a Heat & Cool only. Making them ideal heaters for geographic areas that have wide temperature swings between day and night or to help extend the swimming season as much as possible.

These are video tests of our Jandy AE2500 TR Heat & Cool installed in Las Vegas, Nevada:

July 3, 2008
JandyAE2500, 118,000 BTU's heat pump running in Las Vegas, NV, 18 foot round above ground pool with air temperature of 111 degrees and 5% humidity.

July 3, 2008
JandyAE2500, 118,000 BTU's heat pump running in Las Vegas, NV, 18 foot round above ground pool with air temperature of 115 degrees and 3% humidity.

July 15, 2008
JandyAE2500, 118,000 BTU's heat pump running in Las Vegas, NV, 18 foot round above ground pool with air temperature of 115 degrees and 18% humidity.

Below are some of the best Heat & Cool heat pumps available on the market: